Allowable Tensile Load For PE Pipe During Pull In Installation
Introduction The ATL is the allowable safe pulling load that can be applied to a polyethylene pipe. If installation-applied stresses...
- Home
- HDD
-
-
Operational Stress – Steel Pipe
Introduction A pipeline is subjected to three primary loading conditions during installation by HDD: tension, bending, and external pressure. A... -
Hydraulic Fracture Analysis
Introduction The Pipeline HUB is home to many tools and calculators. The following user’s manual will outline calculations that cover... -
Pump Output (Duplex and Triplex)
Formulas Duplex Pump Output: P_{\text{od}} = \left( {E/100} \right)\times \left( (2 \times Dl^2) – DR^2 \right) \times Ls / 6176.4... -
Settlement Analysis
Formulas These are the formulas used for Horizontal Directional Drilling that need to be taken into account. Volume of the...