Pump Output (Duplex and Triplex) Formulas Duplex Pump Output: P_{\text{od}} = \left( {E/100} \right)\times \left( (2 \times Dl^2) – DR^2 \right) \times Ls / 6176.4...
Settlement Analysis Formulas These are the formulas used for Horizontal Directional Drilling that need to be taken into account. Volume of the...
Drilling Fluids – Frictional Pressure Loss Formulas Flow rate, flow regime, rheological properties, and conduit geometry are among the key parameters that impact frictional pressure losses...
PE Pipe – Pull Force and Installation Stresses (Specific Radius of Curvature) Specific Radius of Curvature This procedure is for designing the bore path specific using radius of curvature calculations for plastic...
Pull Force and Installation Stresses – Vertical When pipes are installed by HDD, they often experience high tension loads, severe bending, and external fluid pressures. Often these...