HDDPT Hydraulic Fracture Analysis

Introduction

The Pipeline HUB is home to many tools and calculators. The following user’s manual will outline calculations that cover design, construction, operations, and integrity. The HDD PT User’s Guide presents information, guidelines, and procedures for use during design, construction, operations, and integrity tasks for field or office applications. Horizontal Directional Drilling (HDD) is for professionals involved in the design, engineering, and installation of pipelines and utilities by horizontal directional drilling.

The HDD module provides a means to generate high-level drill designs and/or check and analyze existing designs you may encounter in the field. The underlying mathematical models and technical procedures are based on the latest HDD technology and are following current regulations, standards, and recommended practices. The HDD module provides standard stress and pull force analysis for steel, drilling fluid, and pressure analysis, and addresses the installation of cables in conduits.

Module/Application

References

  • Willoughby, David (2005). Horizontal Directional Drilling, McGraw-Hill, New York, ISBN 0-87814-395-5. V
  • Staheli, Price and Wetter (May 2010). Effectiveness of Hydro Fracture Prediction for HDD Design, NASTT No-Dig Show

Appendix of Definitions

AUGER BORING – Casing is jacked into the ground as a rotating auger works simultaneously to remove the excavated soil. It is commonly used in applications where settlement is a concern: under highways, railways, and levies. Also known as a dry bore.

BENTONITE – A natural clay material used as a basic ingredient for drilling muds and lubricants to facilitate ease of installation.

BORE OR BOREHOLE – drilling term – The elongated cavity created by the drilling process. Often the borehole is not a void, but rather a hole filled with drilling mud and cuttings. Well casing is pulled or pushed into the borehole to complete a well.

CASING – drilling term – The non-perforated or non-slotted pipe that comprises the entry and exit sections of a horizontal well, as opposed to the well screen. Surface casing is a pipe that is set through loose surficial deposits to stabilize the bore, so the deeper sections can be drilled without difficulty from caving or collapse in the upper section of the borehole.

CROSSING – A pipeline installation designed to pass beneath a surface obstruction. Examples of crossings include roads, railway tracks, water bodies, pipeline corridors, and utilities.

DEFLT EQUATION – Cavity Expansion Model – A model for evaluating risks, specifically maximum allowable drilling fluid pressures. Also used by the US Army Corps of Engineers.

DRILLING MUD – drilling material – aqueous slurry that is used during drilling to transport drill cuttings from the borehole, prevent borehole collapse and provide lubrication for the drill string. Most horizontal drilling uses drilling mud of some sort, although in some conditions it is possible or preferable to drill using air or water. Drilling mud made be made using the mineral bentonite, synthetic or natural polymers, or some combination of the two.

DRILL RIG – A trenchless machine that installs pipes and cables by drilling a pilot hole that can be enlarged (if necessary), and then pulling the product line.

ENTRY POINT – The starting location of the crossing where the drill enters the ground.

EXIT POINT – The end location of the crossing.

FORWARD REAMER – drilling tool – A type of reamer used to enlarge the diameter of the borehole in a blind or single-entry well.

HORIZONTAL DIRECTIONAL DRILLING (HDD) – A surface-based trenchless technology that involves a horizontal bore under the surface along a planned pathway. Once the HDD creates a bore of a suitable size – which may require one or multiple passes by the drilling apparatus – the conduit or pipe is pulled into the bore and connections are made to the appropriate utilities.

OPEN CUT – Underground construction method involving excavation from ground level to the level required for the installation, maintenance, or inspection of a pipe, conduit, or cable. Upon completion of the work, the trench is backfilled, and the surface restored. Backhoe excavation is an example of open-cut construction.

PILOT BORE – drilling term – The initial boring made in a horizontal well installation. The pilot bore is steered, using any of several technologies, from a designated entry point, along a predetermined bore path, to a designated endpoint, either at the ground surface or at depth. The pilot bore subsequently may be reamed to a larger diameter to accommodate the desired size well screen and casing.

PIPE PULLING – Method used to replace small diameter pipes by attaching new product pipe to the existing pipe, which is then pulled out of the ground.

POTHOLE – drilling term – a small hole excavated from the surface to a buried utility in order to provide positive verification of its location.

REAMER – drilling tool – a cutting tool used to enlarge the diameter of a borehole after the pilot bore has been drilled.

SOIL FRICTION ANGLE – A measure of the ability of a unit of soil to withstand shear stress.

SOIL COHESION – A component of the shear strength of a soil that is independent of friction.

SOIL SHEAR MODULUS – A modulus of rigidity (G) or (S) or (u) defined as the ratio of shear stress to the shear strain.

Related Links

Horizontal Directional Drilling PowerTool