HDDPT Plastic Pipes

Plastic Pipes Introduction

The Pipeline Toolbox is home to many tools and calculators. The following user’s manual will outline calculations that cover design, construction, operations, and integrity. The PLTB User’s Guide presents information, guidelines, and procedures for use during design, construction, operations, and integrity tasks for field or office applications. Horizontal Directional Drilling (HDD) is for professionals involved in the design, engineering, and installation of pipelines and utilities by horizontal directional drilling.

The HDD module provides a means to generate high-level drill designs and/or check and analyze existing designs you may encounter in the field. The underlying mathematical models and technical procedures are based on the latest HDD technology and are following current regulations, standards, and recommended practices. The HDD module analyzes the pull force and installation stresses for an HDD installation using steel pipe. Additionally, operational stresses applicable for the steel pipe design are calculated and verified.

Module/Application

• PE Pipe – Pull Force and Installation Stresses (Specific Radius of Curvature)
• PE Pipe Pull Force and Installation Stresses
• Allowable Tensile Load for PE Pipe During Pull In Installation
• PE Pipe – Post Installation Loads and Deflections

References

• ASTM F 1804 – 08 “Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation”
• “Polyethylene Pipe for Horizontal Directional Drilling”, Plastics Pipe Institute, Washington, D.C.
• “Horizontal Directional Drilling”, Utility and Pipeline Applications, David A. Willoughby

Appendix: Definitions

AUGER BORING – Casing is jacked into the ground as a rotating auger works simultaneously to remove the excavated soil. It is commonly used in applications where settlement is a concern: under highways, railways and levies. Also known as a dry bore.

BENTONITE – A natural clay material used as a basic ingredient for drilling muds and lubricants to facilitate ease of installation.

BORE OR BOREHOLE – drilling term – The elongated cavity created by the drilling process. Often the borehole is not a void, but rather a hole filled with drilling mud and cuttings. Well casing is pulled or pushed into the borehole to complete a well.

CASING – drilling term – The non-perforated or non-slotted pipe that comprises the entry and exit sections of a horizontal well, as opposed to the well screen. Surface casing is a pipe that is set through loose surficial deposits to stabilize the bore, so the deeper sections can be drilled without difficulty from caving or collapse in the upper section of the borehole.

CROSSING – A pipeline installation designed to pass beneath a surface obstruction. Examples of crossings include roads, railway tracks, water bodies, pipeline corridors and utilities.

DRILLING MUD – drilling material – aqueous slurry that is used during drilling to transport drill cuttings from the borehole, prevent borehole collapse, and provide lubrication for the drill string. Most horizontal drilling uses drilling mud of some sort, although in some conditions it is possible or preferable to drill using air or water. Drilling mud made be made using the mineral bentonite, synthetic or natural polymers, or some combination of the two.

DRILL RIG – A trenchless machine that installs pipes and cables by drilling a pilot hole which can be enlarged (if necessary), and then pulling the product line.

ENTRY POINT – The starting location of the crossing where the drill enters the ground.

EXIT POINT – The end location of the crossing.

FORWARD REAMER – drilling tool – A type of reamer used to enlarge the diameter of the borehole in a blind or single-entry well.

HORIZONTAL DIRECTIONAL DRILLING (HDD) – A surface-based trenchless technology that involves a horizontal bore under the surface along a planned pathway. Once the HDD creates a bore of a suitable size – which may require one or multiple passes by the drilling apparatus – the conduit or pipe is pulled into the bore and connections are made to the appropriate utilities.

OPEN CUT – Underground construction method involving excavation from ground level to the level required for the installation, maintenance, or inspection of a pipe, conduit, or cable. Upon completion of the work, the trench is backfilled, and the surface restored. Backhoe excavation is an example of open-cut construction.

PILOT BORE – drilling term – The initial boring made in a horizontal well installation. The pilot bore is steered, using any of several technologies, from a designated entry point, along a predetermined bore path, to a designated endpoint, either at the ground surface or at depth. The pilot bore subsequently may be reamed to a larger diameter to accommodate the desired size well screen and casing.

PIPE PULLING – Method used to replace small diameter pipes by attaching new product pipe to the existing pipe, which is then pulled out of the ground.

POTHOLE – drilling term – a small hole excavated from the surface to a buried utility in order to provide positive verification of its location.

REAMER – drilling tool – a cutting tool used to enlarge the diameter of a borehole after the pilot bore has been drilled.

Related Links

Horizontal Directional Drilling PowerTool